The standard delivery programme contains:
Strips, wires, tubes, anodes, precious metal castings and also ring blanks.

Our semi-finished products are used not only in the precious metals processing industry but also in the electrical and electronics industries.

Especially for these divisions, Heimerle + Meule also provides Precious metal salts and –solutions as well as universal electro-
plating chemicals. Furthermore we deliver the according equipment. (See electroplating chemicals and plating units and systems)

			Gold alloy	Silver alloy	Platinum alloy
Sheet + strips	thickness	[mm]	0,10 – 5,00	0,10 – 7,00	0,10 – 3,00
	width - sheet	[mm]	3,00 – 240,00	3,00 – 240,00	on request
	width - strips	[mm]	3,00 – 100,00	3,00 – 150,00	on request
	length	[mm]	on request	on request	on request
Wire	round	[mm]	0,10 – 5,00	0,10 – 5,00	0,25 – 5,00
	rolled section	[mm]	3,60 – 9,40	3,60 – 9,40	3,60
	square	[mm]	1,00 – 5,00	1,00 – 5,00	on request
	special profiles		on request	on request	on request
	wire coils		solid as sprial or single ring
Rods and bars	round	[mm]	1,00 – 30,00	1,00 – 30,00	1,00 – 15,00
	square	[mm]	1,00 – 20,00	1,00 – 20,00	1,00 – 10,00
	special profiles		on request	on request	on request
Turnes and milled parts			on request	on request	on request
Tubes	round and shaped	[mm]	ext. – Ø max. 70,00	ext. – Ø max. 70,00	ext. – Ø max. 30,00
			ext. – Ø min. 1,50	ext. – Ø min. 1,50	ext. – Ø min. 1,50
			wall max. 5,00	wall max. 6,00	wall max. 4,00
			wall min. 0,15	wall min. 0,15	wall min. 0,50
Precious metal round blanks			on request	on request
Precious metal castings		[mm]	castings	castings	planchets, stamped
Anodes	thickness	[mm]	1,00 – 7,00	1,00 – 15,00
	width	[mm]	50,00 – 200,00	50,00 – 150,00
	drilling		on request according to customer specifications
	rod anodes	[mm]		Ø 11,00
	anode sections	[mm]		Ø 11,00 x 10,00
	bar anodes	[mm]		Ø 11,00 x 200,00
	dog bone anodes	[mm]	76 mm long / end piece 15 mm / bar thickness 10 mm
Targets and sputtering materials			on request	on request	on request
Continuous	wire	[mm]	Ø 11,00 – 15,00	Ø 10,00 – 15,00
casting material	bars	[mm]	Ø 11/13/15/	Ø 20/30/40/50/60
			20/30/40/50/60
	sheet
	– thickness	[mm]	5,00 – 10,00	5,00 – 12,00
	– width	[mm]	48,00 – 100,00	48,00 – 155,00
	sheet
	milled surface
	– thickness	[mm]	on request	5,00 – 10,00
	– width	[mm]	on request	48,00 – 155,00
	tubes	[mm]	Ø 30,00 x 2,50 to	Ø 30,00 x 2,50 to
			Ø 30,00 x 5,00	Ø 30,00 x 5,00
			Ø 40,00 x 8,00 to	Ø 40,00 x 8,00 to
			Ø 40,00 x 11,00	Ø 40,00 x 11,00
			Ø 45,00 x 12,00	Ø 44,00 x 9,00
			Ø 60,00 x 12,00	Ø 60,00 x 12,00
			Ø 75,00 x 14,00	Ø 75,00 x 14,00
			Ø 90,00 x 10,00	Ø 90,00 x 10,00

The table gives minimum and maximum dimensions for the respective alloy. The relation between outside diameter and wall thickness of tubes and between thickness and width of sheet and strips is determined on an individual basis.

Further shapes and sizes available on request.