COLORIT ® – perfect results in four steps

  1. Coat the cleaned workpiece with COLORIT ® PREMIUM BOND or COLORIT ® PRIMER for 60 seconds; apply a thin layer of COLORIT ® BOND if necessary. Harden under blue light.
  2. Apply COLORIT ® evenly (approx. 0.2 mm layer). Harden under blue light. Repeat the process until the desired level has been reached.
  3. The active layer on the hardened COLORIT ® forms an optimal bond between the individual layers. This is only removed at the end using ethanol and/or fine sandpaper.
  4. Grind, lathe or polish COLORIT ® as required. The finished workpiece can also be galvanised as a final step.